Welbilt Frymaster McDonald's LOV BIGLA30 Gen II Series Installation, Operation And Maintenance Manual page 56

6. If changing this setting, enter a number between 0-9.
7. Press the  (2) button to accept selection.
8. Press the  (2) button two times to exit.
The computer displays OFF.
4.13.2 E-LOG MODE
The E-LOG mode is used to view the ten most recent error codes encountered on the fryer. These
codes are displayed from 1-10 with the most recent displayed first. The time, date and error code are
displayed.
1. Perform steps 1-3 on pages 4-29 through 4-30.
Computer displays e-LOG .
2. Press the  (1 yes) button to accept selection.
Computer displays NOW on left and current date with current time on the right.
3. Use the button to scroll through the ten most recent error codes starting
with "A" through "J". Once the last error is displayed, use the  button to
scroll back to the top.
If no errors exist, the computer displays NO ERRORS. Errors are displayed by position A
through J, the side of the error if a split vat, error code and time alternating with the date. An error
code displaying and "L" indicates left side of a split vat and "R" indicates right side of a split vat
where the error occurred (example –A R E06 06:34AM 12/09/08). Error codes are listed in
section 7.2.5 of this manual.
4. Press the  (2) button two times to exit.
The computer displays OFF.
4.13.3 PASSWORD SETUP MODE
The password mode allows a restaurant manager to change passwords for various modes and levels.
1. Perform steps 1-3 on pages 4-29 through 4-30.
Computer displays password SETUP.
2. Press the  (1 yes) button to accept selection.
Computer displays fryer setup.
3. Press the  and  buttons to scroll between:
a. FRYER Setup – Established password to enter FRYER
Setup mode. (Default is 1234)
4-31