Watts Aerco Benchmark OMM-0124 Installation And Start-Up Manual page 95

Benchmark 5000-6000 Boiler Installation & Startup Manual
Change Log:
Date Description
Rev D:
DIR 18-55: Changed Air Inlet Temp Sensor part number from
61024 to 123449 in Section 2.11.2. (Reference PIR 1542)
DIR 18-61: Updated Blower Proof Switch Test, Section 5.8.1.
DIR-19-04: Added additional requirements to Section 1.2:
Emergency Shutdown.
DIR-19-15: Modified requirement for that housekeeping pad must
5/9/2019
be level in Section 2.4.2.
DIR 19-34: Revised description of I/O board's Analog Out terminals
in Section 2.11.8
DIR 19-38: All voltage requirements moved into the BMK Electrical
Power Guide, TAG-0048, GF-2060.
DIR 19-43: Changed Section 2.6 to reflect a single pressure relief
valve.
Rev E:
12/17/2019
Added manifold pressure values for Low Gas Pressure (LGP) gas
trains to Natural Gas Combustion Calibration Table 4-1, page 52.
© AERCO International, Inc., 2019
OMM-0123_E • GF-207 • 12/17/2019 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Changed By
Chris Blair
Linley
Thobourne
Page 95 of 95