Installation; Location; Mains Power Supply - ESAB Caddy Arc 151i VRD Instruction Manual

GB
4

INSTALLATION

The installation must be carried out by a professional.
Note
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence the
power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment may be connected.
4.1

Location

Position the power source such that its cooling air inlets and outlets are not
obstructed.
4.2

Mains power supply

Check that the welding power source is connected to
the correct voltage and that the correct fuse size is used.
A protective earth connection must be made in accordance
with regulations
bh38d1e
Location of rating plate
- 8 -
© ESAB AB 2012