Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Multitech ProxyServer MTPSR2-201
Summary of Contents for Multitech ProxyServer MTPSR2-201
- Page 1 Internet Access for LAN-Based Users Model MTPSR2-201 Quick Start Guide...
-
Page 2: Quick Start Guide
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. -
Page 3: Table Of Contents
Contents Introduction ... 4 Related Documentation ... 5 Safety Warnings ... 6 Unpacking your ProxyServer ... 6 V.35 Shunt Procedure ... 7 Cabling your ProxyServer ... 9 Cabling Procedure ... 10 Loading your Software ... 11 Limited Warranty ... 16 Service ... -
Page 4: Introduction
DSU ProxyServer Quick Start Guide Introduction Welcome to Multi-Tech's new DSU ProxyServer, model number MTPSR2-201, a single, secure gateway that provides multiple LAN users with high performance Internet access over a leased line. The DSU ProxyServer functions as a TCP/ IP proxy server that resides on the outer edge of your firewall and provides up to 56K of bandwidth to LAN users. -
Page 5: Related Documentation
A detailed DSU ProxyServer User Guide is also provided with your unit. This user guide provides in-depth information on the features and functionality of Multi-Tech’s ProxyServer. The User Guide is provided in diskette form and is also available from our web site. -
Page 6: Safety Warnings
DSU ProxyServer Quick Start Guide Safety Warnings 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. -
Page 7: V.35 Shunt Procedure
V.35 Shunt Procedure If you are using an external DCE device on the WAN 2 RS232/ V.35 port, and the connection will be a V.35 connection, the the interal shunt must be moved from the RS232C (default) position prior to cabling and power-up. The following steps detail the procedures for switching the shunt. - Page 8 DSU ProxyServer Quick Start Guide Place the unit on a flat, grounded surface, with the LED’s facing you. Pry the shunt out of the RS232 position, and insert it in the V.35 position. Figure 2-3. Shunt Positions Align the board with the guide slots on the inside of the chassis and carefully slide the board back into the chassis.
-
Page 9: Cabling Your Proxyserver
Cabling Cabling your ProxyServer Cabling your ProxyServer involves making the proper Power, Command Port, and DSU connections, and optionally, the RS232/V.35 connection. Figure 3 shows the back panel connectors and the associated cable connections. The table that follows details the procedures for connecting the cables to your ProxyServer. -
Page 10: Cabling Procedure
DSU ProxyServer Quick Start Guide Cabling Procedure Step 1. Connect one end of the power supply to a live AC outlet and connect the other end to the ProxyServer as shown in Figure 3. The power connector is a 6-pin circular DIN connector. -
Page 11: Loading Your Software
Loading your Software The following loading procedure does not provide every screen or option in the process of installing the ProxyServer software. The assumption is that a technical person is doing the installation and that a thorough knowledge of Windows and the software loading process is understood. - Page 12 DSU ProxyServer Quick Start Guide 4. Follow the on-screen instructions to install your ProxyServer software. 5. The following dialog box selects the COM port of your PC conntected to the Command port of the ProxyServer. From the Select Port window, click on the down arrow and choose the COM port of your PC.
- Page 13 6. The following screen appears. Click Finish to continue. 7. The following screen appears. Click Yes to download the default setup. 8. The IP Setup dialog appears. Software...
- Page 14 DSU ProxyServer Quick Start Guide 8. Select the proper port from the Port Selection list. By default, LAN is selected. Enter the the valid IP Address and Net Mask assigned by your ISP. Highlight WAN 1, and choose either ISP Assigns Dynamic Address (default) to allow the ISP to automatically assign the ProxyServer IP address and Net Mask, or disable ISP Assigns Dynamic Address by...
- Page 15 10. In the WAN 2 group, configure the parameters of the external DCE device attached to the WAN 2 port. If the external device is a modem, click on the drop down list in the Modem Type field and choose the proper modem type.
-
Page 16: Limited Warranty
DSU ProxyServer Quick Start Guide Limited Warranty Multi-Tech Systems, Inc. (“MTS”) warrants that its products will be free from defects in material or workmanship for a period of two years from the date of purchase, or if proof of purchase is not provided, two years from date of shipment. -
Page 17: Service
Warranty, Service and Regulatory Information Service Multi-Tech has an excellent staff of technical support personnel available to help you get the most out of your Multi-Tech product. Refer to your ProxyServer User Guide for Warranty and Service information. FCC Declaration... - Page 18 82085000...
Need help?
Do you have a question about the ProxyServer MTPSR2-201 and is the answer not in the manual?
Questions and answers