Xblitz A2 GPS Manual page 12

the event of a malfunction, contact the service department.
2. Use only original accessories.
3. Use only the original charger supplied. The use of any other power supply
may adversely affect the performance of the device, battery, or GPS module.
4. The device may not be used in contravention of the laws of your country
or region.
5. Permissible operating temperatures are 0-35 °C, storage temperatures
5-45 °C.
6. Do not subject the device to damage or impacts.
7. Take care of the cleanliness of the product, especially the lens. Do not use
detergents or chemicals when cleaning.
8. Clean only when the unit is unplugged.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you smell burnt plastic or electronics from the camera, unplug the unit as
soon as possible and contact the service.
12. The device is designed for use inside the car. It should not be exposed to wa-
ter or dust. The exception is the rear view camera, which is splash-proof and
can be mounted outside the vehicle. It should not be submerged in water.
09. FAQ
1. The device does not switch on/off.
The reason may be a permanent power source in the cigarette lighter socket.
2. The device restarts while driving.
It is recommended to check the power source.
3. The device does not record in a loop (it records randomly).
Check the settings of the "motion detection" function - it should be switched
off.
4. The device shows the message "card full".
Check the "G-sensor" and "parking mode" functions and set them to
minimum. The card must be formatted in FAT32 format first on the computer
and then on the recorder.
5. The device is not responding.
Briefly press the RESET button or restore the device to factory settings.
6. There are transverse stripes in the video.
Incorrect setting of the frame rate value. Set the frequency value to 50Hz or
60Hz depending on local settings.
10. NOTE
1. Due to continuous product improvement, the manufacturer reserves the
right to make changes to the device and its kit without prior notice. Some
functions described in this manual may differ slightly from reality.
12