EM Acoustics M-C12 Product User Manual page 20

Compact two-way passive coaxial stage monitor

7.0 – Servicing Information

All M-C12 components can be removed for service purposes if required, using the minimum of tools.

7.1 – M-C12: Removing the grille

TOOLS REQUIRED: 4mm Allen key

Lie the enclosure on its' floor runners and remove the four M6x30 countersunk socket screws from

each end using a 4mm Allen key, and then lift the grille clear of the cabinet.

To replace the grille, position the grille on the front of the M-C12 and ensure the threaded fittings on

the grille are lined up with the mounting holes – gentle pressure may be required. Replace all of the

M6x30 countersunk socket screws and ensure they are all are started in their threads before

beginning to tighten. Ensure they are all tightened evenly so that the grille sits straight and does

not rattle. Be careful not to over-tighten as this will distort the grille.

Page 20 of 27

M6x30 countersunk socket

machine screws

M-C12 User Manual

v2 November 2019

Emamc-12