Advertisement
6.0 – Powering the System
The M-C12 can be powered from any amplifier & DSP combinations with the relevant high
& low pass filter, and limiter settings. However, due to the self-contained nature of the
package, the use of DQ Series advanced system amplifiers is highly recommended. The
use of DQ Series amplifiers provides a neat and flexible system that will encompass all
requirements for the system to function correctly, as well as providing user control for
room EQ and system alignment.
6.1 - Amplifier and Processing Requirements
6.1.1 - Connections
The M-C12 requires only a single amplifier channel. Inputs to the M-C12 enclosure are on
Neutrik SpeakON NL4 concealed in either end as illustrated below.
Two-core cable should be used for connecting M-C12 loudspeakers, and the connections
are as follows:
SpeakON connection
Drive unit connection
NL4 connector
1+
1-
LF +
LF -
Page 15 of 27
2+
2-
Link Through Link Through
M-C12 User Manual
v2 November 2019
Advertisement
