Advertisement
6.3 - Use with the DQ Series Advanced System Amplifiers
The M-C12 will perform best when using DQ Series advanced system amplifiers, as not only are they
state-of-the-art amplifiers, but the onboard DSP provides appropriate high/low pass filter settings
and limiters to get the best from your subwoofers. Please refer to the DQ Series User Manual for
detailed information on using the amplifiers and the System Engineer software.
6.3.1 - Connections
6.3.2 - Preset Recall
The M-C12 preset is pre-installed on the DQ amplifiers, and as such can be used following
the normal preset recall procedure. The presets available are:
M-C12.full
As mentioned above, these presets are intended to be a starting point and additional work
may be required depending on the venue, the style of content and the end result you are
looking for.
Standard M-C12 preset
The four amplifier channels appear on four
speakON connectors on the rear of the DQ Series
amplifiers. M-C12 loudspeakers require one
amplifier channel.
Page 18 of 27
M-C12 User Manual
v2 November 2019
Advertisement
