Advertisement
Page 14 of 27
5.4 – Using the IB-MC12
The IB-MC12 is intended as a cost-effective installation bracket solution. To fit, lie the M-
C12 on its side and line the IB-MC12 up with the flying points. One point lines up with the
fixed hole on each side, and the other lines up with the curved slot to allow you to rotate
the loudspeaker to the desired angle.
M8 form A washer
M8 spring washer
M8x30 socket head bolt
Once the desired angle is arrived at, securely tighten all four bolts to lock the loudspeaker
in place.
Multiple attachment holes are provided to secure the IB-MC12 to walls or ceilings in an
installation environment.
Always ensure that a secondary safety is used when suspending any loudspeaker.
M-C12 User Manual
v2 November 2019
Advertisement
