EM Acoustics M-C12 Product User Manual page 13

Compact two-way passive coaxial stage monitor

Page 13 of 27

5.2 – Using the FC-MC12

The FC-MC12 is intended be used in a temporary scenario – either using a hook clamp or

similar from above.

M8x30 locking knob

M8 spring washer

M8 flat washer

Angle locking knob

Loosen the angle locking knobs so that the outer yoke can be rotated relative to the inner

yoke, which allows access to the mounting points. Line the yoke up, and then use the

supplied M8x30 locking knobs - with flat and spring washers - to secure the cradle to the

loudspeaker. Ensure the inner yoke is secure. The tilt angle can then be set with the

locking knob.

5.3 – Using the M-C12 on a loudspeaker stand

Concealed within the handle on the right-hand side of the M-C12 enclosure is a standard

35mm polemount. By turning the loudspeaker on its end, it can be placed onto a

loudspeaker stand when using as a FOH loudspeaker.

Polemount socket

M-C12 User Manual

v2 November 2019

Emamc-12