Appendix Iso3691 Motor Industrial Vehicle-Safety Norms - Hyundai 12ESH Operation Manual

Appendix
ISO3691 Motor industrial vehicle—Safety Norms
The Second Part Safety Norms of motor industrial vehicles in service, operation and maintenance
14 Safety rules for the user and driver
In order to use the motor industrial vehicle well, this part set up some rules. The 14.1 is applied to the user, the
14.2 is for the driver.
14.1 Applied to the user
The users are the owner or the leaser individual or corporation of the truck.
14.1.1 The qualification of the driver
The driver of the motor industrial vehicle should be trained, pass examination and get the operation qualification.
14.1.2 The truck working in flammable and explosive circumstance
Only the industrial motor truck getting the qualification of the national authoritative department and getting the
license of working in the flammable and explosive circumstance, should work in the circumstance.
This kind of truck should be marked with proper stamp sign, and the relevant building or the plant should be
marked too.
The classification of the building or the field condition should agree on by the user and the national relevant
authoritative department.
14.1.3 Passenger
Except for special seats, the vehicle can't carry passengers. The passengers are forbidden to step on the ascent
machine or the attachment, except for the following conditions:
The truck mounted working platform (except for the high-lift order picker):
A) The platform should be fixed on fork rack/ fork firmly.
B) If there is no ascent control device, when there is person on the platform, the driver should leave the driving
position.
C) When there is person standing on the platform with ascent control device, only this ascent control device
on the platform can be used.
D) The overall weight of the platform, the load and the people should not over the half of the weight marked
on the vehicle nameplate.
E) The platform on the truck should not be used to transport people. But if for the hand work, the truck can
be adjusted for operation in a small range.
14.1.4 The use of the forklift
14.1.4.1 The change of the capacity and nameplate of the truck
The truck in use shall not exceed the rated capacity stipulated by the factory.
Without the permit of the factory, any amendment of the design is forbidden, and should not add any
attachment on the truck, in order to prevent the influence of the capacity and operation safety of the truck.
Any changing because of adding attachment should not reduce the security and accord to the requirement
of this rule. After adopting the attachment, the capacity of the truck, the operation and the repair direction
board, label or pattern should be altered correspondently.
The user should ensure all the nameplate and label in proper position, and maintain handwriting clear.
14.1.4.2 Stability
The user should pay attention to section 6 of the code, which is about the stability of the truck in the working
conditions.
When operating correctly, the high lift truck accord with the section 6 is steady, but the incorrect operating
or the wrong maintenance could let the truck working unsteadily.
The factors that may influence the stability are: the condition of the ground and the floor, grade ability, speed,
load, the weight of the storage battery, the dynamic force and the static force as well as the judgment train
conditions of the drivers.
When the truck is working in the condition differ to the regular working condition stated in the section 6,
should reduce the load.
34