Loading, Unloading, Transportation And Storage Of Truck - Hyundai 12ESH Operation Manual

accordance with DIN51524T.2. This kind of lubricating oil has very high viscosity (mostly applied to hydraulic oil).
When the hydraulic oil is difficult to purchase, engine oil SAE20W/20 can substitute hydraulic oil HLP68.
（2） Gear oil:
Hypoid gear oil 85W-90 (GL-5)
（3） Lubricating grease:
Lithium base grease NO.3
All the wasted hydraulic oil, gear oil and grease can pollute the environment, therefore, please recycle the replaced
working mediums or dispose according to local regulations.
9.10 Maintenance periods of consumables and some components:
Item
Fork wheel bearing
Fork wheel
Sealing parts
Gearbox
Hydraulic oil
Oil pipe
Filter screen
Driving motor
Steering motor
Oil pump motor

10. Loading, unloading, transportation and storage of truck

10.1 Storage of truck
If this truck will not be used for over 2 months, it should be parked in a well-ventilated, frostless, clean and
dry room, and the following measures should be taken:
Clean the truck thoroughly.
Lift and lower the forks completely for several times, and check if it's normal.
Lower the forks to the lowest position.
Support the end of the truck which nears the operator with wood beams to make the drive wheels away from
the ground.
Apply a layer of thin oil or grease to all the exposed surfaces of mechanical parts.
Lubricate the truck.
Inspect the battery conditions and the electrolyte, and apply non-acid lubricating grease to the battery
terminals.
Spray all the electrical contacts with proper spray.
21
Maintenance content
Replace
Replace
Replace
Replace lubrication oil
Replace
Replace
Clean
Check carbon brush and bearing
Check carbon brush and bearing
Check carbon brush and bearing
Maintenance periods
1200 h
1200 h
1200 h
1000 h
1000 h
2000 h
1000 h
1000 h
1000 h
1000 h
Remarks
Replace anytime damage is
discovered
Replace anytime damage is
discovered