Inspections Before Operations - Hyundai 12ESH Operation Manual

7．Inspections Before Operations
In order to achieve safe operations and keep the truck in good conditions, full inspections on the truck is required before
operating, which is a legal duty. Contact our sales department timely if any problem is discovered.
7.1 Inspection points and contents
NO.
Braking
system
Steering
system
Wheel
Battery
Horn
Instrument
Others
15
Check point
1 Operation handle
2 Brake clearance
3 Operation handle
4 Oil pipe
5 Hydraulic oil
6 Lifting oil cylinder
Pins, screws
7
fasteners
8 Wearing condition
9 Charge
10 Electrolyte
11 Connecting wire
12 Horn
13 Function
Structural parts including
14
truck frame
15 Function
Pull operation handle to make it switch between
areas A and B; the brake has sounds of
absorption.
Brake clearance
0.2--0.8mm.
Degree of tightness and steering flexibility.
Oil pipe leaks or not.
Proper oil amount.
Oil cylinder leaks or not.
and all If any pin, screw or fastener becomes loose or
falls or not.
Compared with parameter list, replace of wheel
diameter has reduced by 5%.
Determine display condition of battery capacity.
Liquid level and density of electrolyte.
Connecting wire and socket shall be firm.
Push the button, whether it sounds or not.
Turn on key switch, whether instrument display is
normal or not.
No damage or crack.
Whether lifting/lowering, forward/backward,
emergency reverse and others are normal,
whether there is any abnormal sound.
Check content
shall be kept between