Cembre SD-9P-ECO Operation And Maintenance Manual page 5

1.7) "MND" type spindle: featuring an automatic quick lock mechanism suitable for augers with Ø
14 mm shank. "MND 1" Spindle; available as an option: suitable for augers with Ø 16 mm shank.
1.8) PRM-UN type detachable guard: stainless steel telescopic element, controlled by the return
springs, which provides protection for the auger. The lower end is threaded for attachment of the
TPM..N end piece.
1.9) TPM... N end piece: threaded centring device for attachment to the PRM-UN guard. Alternative
end pieces are available, with different diameters, to suit different size bushes (see § 3.2).
1.10) Return springs: to assist the retraction of the auger from the sleeper on completion of the
drilling operation and to reduce operator effort.
2. ACCESSORIES SUPPLIED WITH THE DRILLING MACHINE
The drill is supplied complete with the
"Accessories Kit" code: 6001554, containing:
– 1 pc 4 mm allen key.
– 1 pc spark plug key.
– 1 pc measuring cylinder for fuel preparation.
3. ADDITIONAL ACCESSORIES AVAILABLE
3.1) Auger with Ø 14 mm shank.
ø
TYPE
(mm)
PV100 10
PV130
13
PV140 14
PV150 15
PV160
16
PV160-465
PV170
17
PV170L*
Correct operation of the machine and its safe and rapid release of the augers, in case of need,
are guaranteed only by using CEMBRE original PV range augers.
5
L Max. drilling
(mm) thickness: (mm)
325 200
325 200
325 200
325 200
325 200
465 340
325 200
375 250
L
PV..
ø
TYPE
(mm)
PV170-465 17
PV180 18
PV190
19
PV200 20
PV210 21
PV220 22
PV250**
25
PV280 28
ENGLISH
ø 14 mm
L Max. drilling
(mm) thickness: (mm)
465 340
325 200
325 200
325 200
325 200
325 200
325 200
325 200