Single-Wired System Connections; Bi-Wired System Connections - REVELL Performa F30 User Manual

Figure 8. How to connect the
REVEL PERFORMA F30
loudspeaker in a
single-wired system.
Figure 9. How to connect the
REVEL PERFORMA F30
loudspeaker in a
bi-wired system.

SINGLE-WIRED SYSTEM CONNECTIONS

For single-wired applications, simply leave the shorting straps in
place and connect the + and - from a single amplifier channel to the
+ and – terminals on the rear of the REVEL PERFORMA F30
loudspeaker, as shown in Figure 8.
REVEL
PERFORMA
F30
Rear
Connector Panel
Revel
Northridge, California
Made in U.S.A.
Serial Number
xxxx
blk
Install straps for
single-wire operation
Low Frequency Input
-.5 0 +.5
-1 +1
Front Tweeter Level (dB)
Revel
Northridge, California
Made in U.S.A.
Serial Number Install straps for
xxxx for bi-wire Remove straps
single-wire operation or bi-amp
Install straps for
single-wire operation
(one channel shown)
Low Frequency Input High Frequency Input

BI-WIRED SYSTEM CONNECTIONS

A bi-wired system uses two pairs of loudspeaker wires connected to
a single amplifier channel. On the rear of the REVEL PERFORMA
F30 loudspeaker, remove the shorting straps and connect the + and
- of one pair of wires to the HIGH FREQUENCY INPUT termi-
nals and the + and - of the other pair of wires to the LOW FRE-
QUENCY INPUT terminals, as shown in Figure 9.
Check with your Revel dealer for recommendations and possible
benefits for your application.
CAUTION: Failure to remove the shorting straps when bi-wiring
may damage some amplifiers.
REVEL
PERFORMA
F30
Rear
Connector Panel
Revel
Northridge, California
Made in U.S.A.
Serial Number
xxxx
blk
Low Frequency Input
0 +.5
-.5
-1 +1
Revel Front Tweeter Level (dB)
Northridge, California
Made in U.S.A.
Serial Number Install straps for Remove straps
xxxx single-wire operation for bi-wire
or bi-amp
Install straps for
single-wire operation
(one channel shown)
Low Frequency Input High Frequency Input
Amplifier
(one channel shown)
0 +.5
-.5
-1 +1
Front Tweeter Level (dB)
Install straps for Remove straps
single-wire operation for bi-wire
or bi-amp
red
High Frequency Input
Shorting Strap
(leave both in place)
Amplifier
(one channel shown)
0 +.5
-.5
-1 +1
Front Tweeter Level (dB)
Install straps for
Remove straps
single-wire operation for bi-wire
or bi-amp
red
Shorting Straps Removed
High Frequency Input
REVEL PERFORMA F30
Owner's Manual
(rear)
(rear)
13