Post-requisites
Replace the
right-side
cover.
Clearing CMOS Settings
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
right-side
cover.
Procedure
1. Remove the jumper plug from the password jumper-pins (PSWD) and connect it to the CMOS jumper-pins.
2. Wait for 5 seconds and then replace the jumper plug to its original location.
computer. After working inside your computer, follow the instructions in
After
BIOS setup program
97