NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
right-side
cover.
2. Remove the
front
cover.
Procedure
1. Disconnect the data cable from the optical drive.
2. Disconnect the power cable from the optical drive.
3. Remove the screw (M3x5) that secures the optical drive to the chassis.
4. Push to slide the optical drive out through the front of the computer.
26
Removing the optical drive
Removing the optical drive
computer. After working inside your computer, follow the instructions in
15
After