Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the logo board with the slot on the chassis and replace the two screws (M3x5) that secures the logo board to the chassis.
2. Connect the logo-board cable to the logo board.
Post-requisites
1. Replace the
front
cover.
2. Replace the
right-side
cover.
Replacing the logo board
computer. After working inside your computer, follow the instructions in
24
After
Replacing the logo board
37
Advertisement
Table of Contents
