Removing The Power-Supply Unit; Prerequisites; Procedure - Dell Inspiron 5675 Service Manual

Hide thumbs Also See for Inspiron 5675:

Table of Contents

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

•

•

Prerequisites

Remove the

right-side

cover.

Procedure

NOTE:

Note the routing of the cables while removing the power-supply unit so that you can replace them correctly.

NOTE:

Remove the cables from the routing guides on the chassis to avoid potential damage to the cables.

NOTE:

Disconnect the power cables from their extensions.

1. Lay the computer on the left side and disconnect the power cable from the optical drive.

2. Press the securing clip and disconnect the power-supply unit cable from the processor-power cable.

3. Press the securing clip and disconnect the power-supply unit cable from the system board.

4. Disconnect the power cables from the hard disks.

NOTE:

For computers with graphics card, disconnect the power cable from the graphics card.

Removing the power-supply unit

computer. After working inside your computer, follow the instructions in

Removing the power-supply unit

After

Table of Contents

D27m