NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Procedure
•
Post-requisites
Procedure
1. Align the graphics card with the slot on the chassis.
2. Align and place the graphics card into the slot on system board and press down firmly until the graphics card snaps into place.
3. Replace the screw (6-32UNCx3.6) that secures the graphics card to the chassis.
4. Place the computer in an upright position.
Procedure
Only with computers shipped with AMD Ryzen 3/Ryzen 5/Ryzen 7 processors
1. Align the graphics card with the slot on the chassis.
2. Align and place the graphics card into the slot on system board and press down firmly until the graphics card snaps into place.
3. Replace the two screws (6-32UNCx3.6) that secure the graphics card to the chassis.
4. Connect the graphics-card cable to the graphics card.
5. Align the tab on the graphics-card bracket to the slot on the chassis.
6. Align the screw holes on the graphics-card bracket to the screw holes on the chassis and replace the two screws (6-32UNCx3.6) that
secures the graphics-card bracket to the chassis.
7. Place the computer in an upright position.
Post-requisites
Replace the
right-side
cover.
Replacing the graphics card
computer. After working inside your computer, follow the instructions in
Replacing the graphics card
40
After
61