Dialing The Same Receiving System (Redial) - Olivetti d-Copia 4200MF Manual

Dialing the Same Receiving System (Redial)

Redial is a function allowing you to dial the last entered number once again.
Automatic Redial
This function automatically redials a receiving system that does not respond when you try to send fax.
No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular
interval, you do not need to worry even when the communication by the receiving system is prolonged.
NOTE:
When using direct transmission, the machine does not automatically redial.
You can change the number of automatic redials from between 0 and 14. For details, refer to Retry Times on
page 6-8.
You cannot send delayed transmission immediately while the machine is waiting for redial.
Manual Redial (Recall)
Use this when the receiving system does not respond when you have tried to send a fax. When you want to send
the fax to the same receiving system, press [Recall], and you can call the receiving system you dialed on the
destination list.
Ready to send.
Place original.
Destination
A OFFICE 1234567890
B OFFICE 1234568907
C OFFICE 1234569078
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC DDD
0006 0007 0008
FFF GGG HHH III
Destination Quick Setup Original/Sending
Data Format
Status
OPERATION GUIDE
Destination
Detail
Address
Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005 No.
EEE i-FAX
Addr Entry
0009 0010
1/100
WSD Scan
JJJ
Image Quality Advanced
Setup
08/08/2009 10:10
1
Press [Recall]. The receiving system you dialed is
displayed on the destination list.
NOTE:
When the last transmission included multi-
address transmissions and computers and e-mail
destinations, they are also displayed. If necessary, add
or delete the receiving system.
2
Press the Start key. The transmission will start.
NOTE:
Recall information is canceled in the following
conditions.
• When you turn the power off
• When you send a next fax (new recall information is
registered)
• When you log out
FAX Operation (Basic)
3-33
3