Setting The Tti Information - Olivetti d-Copia 4200MF Manual

Setting the TTI information

Register the name (local FAX name), fax number, and local FAX ID printed in the transmit terminal identification
(TTI) area.
By registering the TTI data, the receiver can easily find out where the FAX came from.
Local FAX Name Registration
Register the local FAX name printed on in the transmit terminal identification.
NOTE:
To change the entry, follow the same operation.
Use the keyboard to enter.
1 2 3 4 5 6 7
q w e r t y u
a s d f g h j
z x c v b n m
Upper-case Lower-case No./Symbol
Status
Local FAX Information Entry
Register the local FAX information (local FAX number/ID) printed on in the transmit terminal identification (TTI)
area. The Local FAX ID is used for transmission limit purposes. (Refer to Transmission Restriction on page 6-
16.)
NOTE:
If you install 2 optional FAX Kits (Dual FAX option) and then use 2 phone lines, you can register Local
Fax Numbers for each of the lines.
To change the registration contents, follow the same operation.
OPERATION GUIDE
Limit: 128 characters
Input: 0 characters
Backspace
8 9 0 ! = ^
i o p [ ] \
k l ; :
, . /
Space
Cancel OK
08/08/2009 10:10
1
Press the System Menu key.
2
Press [FAX], [Next] of Transmission, [Next] of
Basic, and then [Change] of Local FAX Name
Entry. The entry screen will be displayed.
3
Enter the Local FAX Name to be registered. Up to
32 characters can be entered.
NOTE:
For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
4
Press [OK].
1
Press the System Menu key.
2
Press [FAX], [Next] of Transmission, and then
[Next] of FAX.
When you register the Local FAX Number, go to
next step. When you register the Local FAX ID, go
to step 6.
Preparation Before Use
2-3
2