Canceling Communication - Olivetti d-Copia 4200MF Manual

FAX Operation (Basic)

Canceling Communication

The method for cancelling communication with this machine differs depending on the transmission method
(memory transmission or direct transmission) and communication form. Methods of cancelling in various cases
are explained here.
Cancelling Memory Transmission (while originals are being scanned)
Cancelling Memory Transmission (during communication)
During memory transmission, to cancel communication after it has started following the completed scanning of
originals, use the following procedure.
NOTE:
You can cancel transmission by disconnecting the telephone line. For details, refer to Cancelling
Transmission (Disconnection of Communication) on page 3-15.
Status
Status Scheduled Job
Job Type All
Job No. Accepted Time Type Job Name
438 14:47 abc@def.com
Cancel
Printing Jobs Sending Jobs Storing Jobs
Status
3-14
During memory transmission, to cancel scanning while
originals are being scanned, press the Stop key on the
operation panel, or press [Cancel] on the touch panel.
Scanning of originals is canceled, and the originals are
ejected. When originals remain in the document
processor, take them out from the original output table.
1
2
3
Log
User Name Status
InProcess
1/1
Detail
Device/
Paper/Supplies
Communication
08/08/2009 10:10
Press the Status/Job Cancel key.
Press [Sending Jobs].
Select the job you want to cancel, and press
[Cancel].
When the cancel confirmation screen appears,
press [Yes].
Communication is canceled.
OPERATION GUIDE