Printing Administrative Reports
You can print various administrative reports to check the results of fax transmission or the status of the functional
setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also
print the transmitted image in the send result report.
Report - FAX
Print a report of FAX transmission results.
* Results including E-mail/Folder in multiple destinations are also printed.
Off
Attach Send Image
On
Error Only
Off
Status
With transmitted image
Send Result Report
Completed
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
OPERATION GUIDE
Checking Transmission Results and Registration Status
1
2
3
On
Cancel
OK
08/08/2009
10:10
4
1
2
3
4
Press the System Menu key.
Press [Report], and [Next] of Result Report Setting.
Then press [Next] of Send Result Report and
[Change] of FAX.
Press [Off] (not to print), [On] (to print), or [Error
Only].
If you selected [On] or [Error Only], you should then
indicate whether the transmitted image is to be
attached by selecting [Off] (do not print transmitted
image) or [On] (print transmitted image).
Press [OK].
Without transmitted image
Send Result Report
Completed
Press the System Menu key.
Press [Report], [Next] of Result Report Setting,
[Next] of Send Result Report and then [Change] of
Canceled before Sending.
Press [Off], [On].
Press [OK].
5
5-7