Selection Of Transmit Terminal Identification (Tti) - Olivetti d-Copia 4200MF Manual

Preparation Before Use

Selection of Transmit Terminal Identification (TTI)

The transmit terminal identification (TTI) is the information about the machine (transmit terminal) to be printed
out on the fax on the receiving system. The information includes transmission date and time, the number of
transmission pages, and the fax number. This machine enables the user to select if the TTI is printed out on the
fax on the receiving system. Regarding the location of the information to be printed, you can select inside or
outside of the page image being sent.
NOTE:
You can specify the same TTI for FAX and Internet FAX (i-FAX) transmissions.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting has been enabled, and you send originals after entering an Account ID, the Account Name is printed.
FAX - TTI
Attach TTI (Transmit Terminal Identification)
in transmitted documents.
Off Outside
Status
2-2
1
2
3
Inside
Cancel OK
08/08/2009 10:10
4
Press the System Menu key.
Press [FAX], [Next] of Transmission, [Next] of Basic
and then press [Change] of TTI.
Press the location for printing the information on
the fax. If you don't want to print, press [Off].
Press [OK].
OPERATION GUIDE
2