Windows 7 Or Windows Vista Dhcp Settings - KVH Industries TracPhone V7 HTS User Manual

5. In the Internet Protocol Properties dialog box, select Obtain an
IP address automatically and Obtain DNS server address
automatically. Then click OK.
Figure 7-18 Windows 8 - Internet Protocol Properties
6. In the Ethernet Properties dialog box, click Close. Then click
Close in the Ethernet Status dialog box.

Windows 7 or Windows Vista DHCP Settings

To configure a Windows 7 or Windows Vista computer for DHCP
addressing, follow these steps:
1. In Control Panel, double-click Network and Sharing Center.
(You might need to click Network and Internet first.) You can
find the Control Panel either through the Start menu or "My
Computer."
2. In Network and Sharing Center, double-click the Local Area
Connection (Windows 7) or View Status (Windows Vista) for
the Ethernet connection you are using for mini-VSAT
Broadband.
3. In the Local Area Connection Status dialog box, click
Properties. If this screen doesn't appear, just skip to Step 4.
TracPhone V7-HTS User's Guide
Network Configuration
87