Setting Up Tracking Avoidance Zones - KVH Industries TracPhone V7 HTS User Manual

TracPhone V7-HTS User's Guide
Tracking Avoidance Zones

Setting Up Tracking Avoidance Zones

44
To manually configure a tracking avoidance zone, follow these steps.
Important!
KVH actively monitors your antenna system's performance and will
configure a tracking avoidance zone over the air whenever an obvious
blockage area is identified. Therefore, setting up zones yourself on the
vessel is unnecessary in most cases.
1. Identify the necessary azimuth range for the zone (see
"Identify the Azimuth Range" on page
2. Identify the necessary elevation range for the zone (see
"Identify the Elevation Range" on page
3. At the TracPhone V7-HTS web interface, configure a tracking
avoidance zone for that combination of azimuth and elevation
ranges (see "Configure the Tracking Avoidance Zone(s) at the
Web Interface" on page
45).
46).
47).