KVH Industries TracPhone V7 HTS User Manual page 46

Identify the Azimuth Range
First, you need to determine the necessary azimuth range for the
tracking avoidance zone(s). You will need to enter, in clockwise order,
the beginning and ending azimuths that define the outer boundaries of
the zone, relative to the antenna's forward arrow, which should be
pointing toward the bow.
NOTE: Each tracking avoidance zone must span at least 5º. Therefore, be sure
to set beginning and ending azimuths at least 5º apart.
Figure 5-2 Beginning and Ending Azimuths Defining a Zone (Example)
Beginning Azimuth
FROM
000
315
Forward
Antenna
270
225
180
015
Tracking Avoidance Zone
(Example)
Ending Azimuth
TO
080
090
135
TracPhone V7-HTS User's Guide
Tracking Avoidance Zones
45