KVH Industries TracPhone V7 HTS User Manual page 75

TracPhone V7-HTS User's Guide
Network Configuration
78
3. Fill out the online form at www.kvh.com/staticip. Be sure to
read all of the details on this form. An additional monthly fee
for static IP service will apply.
Important!
Only the "User Ethernet 4" port on the ICM can be used to connect
static IP devices, as this port bypasses the ICM's local subnet to
connect directly to the built-in modem.
4. Connect your network device or computer to the "User
Ethernet 4" port on the rear panel of the ICM. Use a straight-
through CAT5 (or better) Ethernet cable with RJ45 connectors.
Figure 7-8 Static IP HTS Configuration Wiring Example
(High-speed LAN)
ICM
User Ethernet
1 2 3 4
Unlimited LAN High-speed LAN
User
Login
Bridge Ops PC Crew PC
5. At the TracPhone V7-HTS web interface or mini-VSAT
Manager, select the Static IP HTS network configuration. Refer
to "Selecting a Network Configuration" on page 71
Wi-Fi
User
Login
Mobile
Devices
Static IP
Accessory LAN
Firewall
User
Login
Mobile
WAP Devices Engine Room PC
for details.