Using A Route; Following, Reversing And Stopping A Route - Raymarine RayChart 630 Owner's Handbook Manual

Chapter 3: Using the Initial Soft Keys
4. Repeat steps 2 and 3 until the required information is displayed.
5. When you have finished editing the data, you can either:
•
•

Using a Route

When you have set up or selected a route, you can perform the following tasks:
• Follow or "initiate" the route (that is, start tracking towards the first
waypoint)
• Retrace a route by following it in reverse order
• Advance to the next leg of the route
• Erase the route
You can also edit the route, even if it is active, as described above.
Note: If you have two chartplotters on your system, the active route on one unit
is also displayed on the second unit, where it will always appear as Route 00.
You can use the Route menu options on the second unit to control the route
tracking on the first unit.

Following, Reversing and Stopping a Route

When you have set up a route, you can start navigating towards the first
waypoint. You can also follow a route in reverse order.
If you did not initiate the route using the SAVE & FOLLOW soft key from MAKE/
EDIT, you can do so as follows:
1. If the Route menu is not already displayed, press the ROUTE soft key to
display it.
2. If the required route is not displayed, press SELECT until the route is
displayed.
Check the route display to confirm which waypoint will become active: this
waypoint is displayed on the screen with a circle round it.
3. If you wish to follow the route in the reverse order, use the trackpad or the
RTE soft key to highlight the REVERSE option, and press ENTER. The circle
moves to the waypoint at the opposite end of the route.
4. Use the trackpad or the ROUTE soft key to highlight the FOLLOW option, and
press ENTER.
The chartplotter navigates towards the waypoint, unless a waypoint is
already active.
Press the SAVE & EXIT soft key to save the changes and return to
the initial screen
or
Press the SAVE & FOLLOW soft key to save the changes, return to
the initial screen, and start navigating towards the first waypoint.
35