Setting Up The Chartplotter - Raymarine RayChart 630 Owner's Handbook Manual

70

Setting Up the Chartplotter

The PLOTTER option, illustrated below, from the Set Up menu allows you to set
up your chartplotter display preferences.
The following table lists the Plotter parameters and their options, shows the
factory default setting, and provides a space for you to make a note of your new
default setting. Each parameter is described in the following subsections.
Parameter
Waypoint Name
Waypoint Display
Course Vector
Heading Vector
Options Factory
Default
3 characters 6 characters
6 characters
16 characters
None
OFF ON
ON
OFF SHORT
SHORT
LONG
INFINITE
OFF SHORT
SHORT
LONG
INFINITE
RayChart 620 and 630
D4201_1
New
Default