Editing Route Information - Raymarine RayChart 630 Owner's Handbook Manual

Chapter 3: Using the Initial Soft Keys
Note: You can also use this option to delete waypoints that are not part of the
current route, if you have selected the waypoint display option when you set up
your chartplotter (see Chapter 6).
To delete a waypoint:
Note: You cannot delete a waypoint if it is used in another route.
1. Use the trackpad to position the cursor over the waypoint you wish to
delete.
2. Press the DELETE WPT soft key.
3. Press ENTER to confirm the deletion.
The waypoint disappears from the screen. If the waypoint was not at the
end of the route, then the waypoints before and after the deleted waypoint
are connected with a straight line.
Press CLEAR to return to the initial screen.
To insert an additional waypoint in a route:
1. Position the cursor on (or close to) the line between two existing waypoints.
2. Press the ADD WPT soft key. The line changes from a solid line to a dotted
line. (If the chartplotter beeps instead, move the cursor closer to the line and
press ADD WPT again.)
3. Move the cursor to the required position. Dotted lines connect the cursor to
the two existing waypoints.
4. Press ENTER. The new waypoint is placed, and named with the first
available waypoint number.
Press CLEAR to return to the initial screen.

Editing Route Information

Once you have created a route, you can edit the route information, including the
route name and the waypoint names, symbols and positions.
To edit the route information for the currently selected route:
1. Press the EDIT soft key from the MAKE/EDIT screen of the ROUTE menu.
The details of the current route are displayed on the screen, and the soft key
labels change, as shown in the following example.
33