Raymarine RayChart 630 Owner's Handbook Manual page 58

Chapter 4: AdditionalBasic Functions
• Select one or more track histories for display.
• Change the track file for the current track history data. If you do this after the
track history has started, the chartplotter stops storing track data to the
original track file and starts storing it in the new file.
• Change the track interval for the current track. You can select one of the
following intervals:
-
-
-
• Start or stop a track history, or delete a selected track. These options perform
the same functions as the START/STOP and DELETE options from the TRACKS
menu.
To edit the controls:
1. From the initial soft key display, press the MENU key to display the main
menus.
2. Use the trackpad or press the TRACKS soft key to highlight the EDIT option,
and press ENTER. The Track History screen is displayed.
CURSOR
50°36.68 N
009°47.60 E
COG
208°M
DEPTH IN FEET
To Cursor
BRG
218°M 415.2$
3. Use the trackpad sides to scroll around the fields, and the trackpad top and
bottom to change the settings.
You can toggle the Display option on or off for any track, change the
current track file number, and change the track interval for the current track.
4. If required, press the START/STOP soft key to turn the current track on or, if it
is already on, to turn it off.
1, 5, 10 or 30 seconds
1, 3, 5, 10 or 30 minutes
0.1, 0.5 or 1.0 nm
SOG
1.4$
TRACK HISTORY
100$
TRACKS POINTS
RNG
1
2
3
4
5
CURRENT TRACK 1
SELECT SCROLL
DIGITS
STOP DELETE
DISPLAY
3 ON
0 ON
0 ON
0 ON
0 ON
INTERVAL 1 sec
ENTER
CLEAR
CANCEL ACCEPT
SELECTION
45
D3830-2