Placing A Waypoint - Raymarine hsb2 Owner's Handbook Manual

Chapter 5: Standard Chart Operations

Placing a Waypoint

The scenario Place and Goto a Waypoint on page 2-26 provides a simple
example of how to place a waypoint.
➤ To access the place waypoint soft keys, press MARKS:
MARKS
➤ To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft key.
The waypoint is added to the waypoint list and tagged using the next avail-
able number.
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press CLEAR.
You can use the EDIT WAYPOINT soft key to name the waypoint as
described in Editing Waypoints below.
2. Press CLEAR or ENTER to remove the place waypoint soft keys.
➤ To place a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key. The Waypoint List
MARKS
and associated soft keys are displayed.
u
POSITION
BRG _186°
WAYPOINT LIST
RNG _21.0nm
---° ---
D4169-1
D4163-1
D4262-2
5-9