Using Marpa - Raymarine hsb2 Owner's Handbook Manual

3-26
For specific configuration and calibration details with the ST80 active
compass refer to Appendix E. If you are using a suitable third party heading
sensor, refer to its documentation for installation and calibration details;
connect such a compass in a similar manner to the ST80 active compass,
giving due consideration to the power requirements.

Using MARPA

The MARPA functions are accessed through the MARPA default soft key, and
some options are available with the context sensitive cursor, or through the
MARPA database list. Where there are two ways of performing a certain
function this section describes both ways. Information on how to set up the
MARPA system is in Section 7.5.
Acquire a Target
➤ To acquire a target:
1. Press the MARPA soft key to display the ACQUIRE TARGET soft keys.
2. Position the cursor over the required target and press the ACQUIRE TARGET
soft key.
The
target at the cursor position. If a target is present for several scans the radar
locks onto it and the symbol
also displayed. If the target is continuously lost, the lost target symbol
displayed and a Lost Target alarm is generated; press any key to cancel the
alarm and remove the lost target symbol from the display.
3. Press ENTER or CLEAR to return to the default display.
Cancel a Target
➤ To cancel a target using the context-sensitive cursor:
1. Move the cursor over the target, the following soft keys are displayed.
2. Press the CANCEL TARGET soft key to cancel target tracking and remove the
symbol from the display. The default soft keys are displayed.
symbol is placed at the cursor position and the radar searches for a
HSB Series Color LCD Display
D4126_1
D4120_1
indicates a safe target, the target vector is
D4119_1
is