Raymarine hsb2 Owner's Handbook Manual page 22

Chapter 1: Overview
Default Display
Targets:
Landmass
Channel buoy
Surface
vessel
Default soft key labels
These can be turned off; press any soft key to re-display them.
Different labels are displayed when you press a key.
Status Bar
Selected range, Range rings
in nautical miles
3nm
Range ring interval
range rings are off
045°
0.28
Current heading
(on/off) if heading data available,
or Course Over Ground.
Can be displayed in
degrees Magnetic or True
126°T
Heading mode
Not displayed if
Normally Head Up (H-UP),
but you can select
Course Up (C-UP) or
North Up (N-UP) if
you have heading data
Status Bar
Range rings
The number and
spacing depend on
the current range, or
you can turn them off
Ship's Heading
Marker (SHM)
You can hide this
temporarily
Cursor position,
controlled by the
trackpad
Ship's position
You can move this
off-centre if required
Bearing scale,
each tick indicating
o
2 of azimuth
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position
on the screen, or
turn it off.
Mode Indicators
displayed when function set on:
Target
Auto mode
Expansion
Gain, Sea
Wakes
and/or Tune
AUTO WKS EX
GST FTC RC
Rain
Clutter
FTC
Interference
(Remote rain)
Rejection
1-9
D3600-4
Guard Zone
Alarms
GZ
IR
D3993-1