Browser Tftp Interface; Obtaining The Access Point Image File - Cisco Aironet 1130AG Series Hardware Installation Manual

Cisco Aironet 1130AG Series Access Point Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
3-18 3-18
Chapter 3 3 Chapter Troubleshooting Troubleshoo

Browser TFTP Interface

Browser TFTP Interface
St Step ep 1 1
St Step ep 2 2
St Step ep 3 3
St Step ep 4 4
St Step ep 5 5
St Step ep 6 6
St Step ep 7 7
St Step ep 8 8
St Step ep 9 9
St Step ep 10 10

Obtaining the Access Point Image File

Obtaining the Access Point Image File
St Step ep 1 1
St Step ep 2 2
St Step ep 3 3
St Step ep 4 4
St Step ep 5 5
Hardware Installation Guide
ting Autonomous Autonomous Access Access Points Points
The TFTP interface allows you to use a TFTP server on a network device to load the access point image The TFTP interface allows you to use a TFTP server on a network device to load the access point image
file. Follow these instructions to use a TFTP server: file. Follow these instructions to use a TFTP server:
Open your Internet browser. Open your Internet browser.
Note Note The access point web-browser interface is fully compatible with Microsoft Internet Explorer The access point web-browser interface is fully compatible with Microsoft Internet Explorer
version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98, version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98,
Windows 2000, and Solaris platforms. Windows 2000, and Solaris platforms.
Note Note When using the access point browser interface, you should disable your browser pop-up blocker. When using the access point browser interface, you should disable your browser pop-up blocker.
Enter the access point's IP address in the browser address line and press Enter the access point's IP address in the browser address line and press Enter
Password screen appears. Password screen appears.
Enter your username in the User Name field. Enter your username in the User Name field.
Enter the access point password in the Password field and press Enter the access point password in the Password field and press Enter
appears. appears.
Click the Click the System Software System Software tab and then click
Click the Click the TFTP Upgrade TFTP Upgrade tab. tab.
Enter the IP address for the TFTP server in the TFTP Server field. Enter the IP address for the TFTP server in the TFTP Server field.
Enter the file name for Enter the file name for the access p the access p oint image file
New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory, New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory,
include the relative path of the TFTP server root directory with the filename. If the file is located in the include the relative path of the TFTP server root directory with the filename. If the file is located in the
TFTP root directory, enter only the filename. TFTP root directory, enter only the filename.
Click Upload Click Upload . .
When a message appears that indicates the upgrade is complete, click OK
When a message appears that indicates the upgrade is complete, click
For additional information click the For additional information click the Help
The access point image file can be obtained from the Cisco.com software center using these steps: The access point image file can be obtained from the Cisco.com software center using these steps:
Use your Internet browser to access the Cisco Software Center at the following URL: Use your Internet browser to access the Cisco Software Center at the following URL:
http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless
Onthe Enter Network Password window appears, enter your Cisco.com username and password and Onthe Enter Network Password window appears, enter your Cisco.com username and password and
click click OK OK. .
Click Wireless LAN Access > Aironet Access Points Click Wireless LAN Access > Aironet Access Points > Cisco Aironet 1130
Click Cisco Aironet 1130AG Access Point Click Cisco Aironet 1130AG Access Point. .
Click IOS Click IOS. .
tab and then click Software Upgrade Software Upgrade. The HTTP Upgrade screen appears.
oint image file (such as c1130-k9w7 (such as c1130-k9w7-tar
Help icon on the Software Upgrade screen. icon on the Software Upgrade screen.
> Cisco Aironet 1130 AG Series
OL-8369-04 OL-8369-04
Obtaining the Access Point Image File Obtaining the Access Point Image File
Enter. An Enter Network . An Enter Network
Enter. The Summary Status page . The Summary Status page
. The HTTP Upgrade screen appears.
-tar.123-8 .123-8.J .JA.tar) in the Upload A.tar) in the Upload
OK. .
AG Series. .