Table of Contents
Advertisement
The USB port bracket is included in the Bracket Kit, spare part number M03436-001.
To install the system board, reverse this procedure.
Fingerprint reader (select products only)
To remove the fingerprint reader, use this procedure and illustration.
Table 5-14
Fingerprint reader description and part number
Description
Fingerprint reader
NOTE:
The fingerprint reader cable is available in the Cable Kit, spare part number M03431-001. The
fingerprint reader bracket is available in the Bracket Kit, spare part number M03436-001.
Before removing the fingerprint reader, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the fan (see
5.
Remove the system board (see
Remove the fingerprint reader:
1.
Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader and bracket to the
computer.
2.
Remove the fingerprint reader bracket (2) from the computer.
Bottom cover on page
Battery on page
35).
Fan on page
48).
System board on page
Preparation for disassembly on page
34).
52).
Fingerprint reader (select products only)
Spare part number
M46281-001
34).
55
Advertisement
Table of Contents
