Charge The Battery - AGFA CG Triumvirate 3R20P User Manual

Direct thermal portable printer
Table of Contents

Advertisement

Battery safety warning:
DO NOT throw the battery in fire. DO NOT short circuit the contacts.
DO NOT disassemble the battery. DO NOT throw the battery in municipal waste.
The symbol of the crossed out wheeled bin (
placed in municipal waste.

3.2 Charge the Battery

It takes 1.5 to 2 hours to fully charge the battery before the first time usage. The
lifetime of the battery is 300 times for charge/discharge cycles.
3.2.1 Charge the Battery
Charging Warning
Do not print (discharge) while the battery is charging. Otherwise, it will harm the battery
life and cause other adverse effects.
The battery normal working condition is from 0°C to 40°C (32 °F to 104 °F). The device
or battery charger always perform battery charging in a safe and optimum manner. At
higher temperatures (e.g., approximately +40 °C (+104 °F) or charging when turning on
) indicates that the battery should not be
1. Open the interface cover and plug
the power cord to the power jack.
2. Plug the power cord into a properly
power outlet.
Note:
Please refer to
Ch. 2.3.2
information about battery charging cycle.
14
for more

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg triumvirate 3r20

Table of Contents