1. Manuals
  2. Brands
  3. SportsArt Fitness Manuals
  4. Home Gym
  5. P751
  6. Owner's manual

SportsArt Fitness P751 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P751/P752 OWNER'S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS ..................................................................
3. LIST OF PARTS .................................................................................
4. ASSEMBLE THE PRODUCT .............................................................
STEP 2 Handle Installation ................................................................... 13
STEP 3 Weight Stack Installation ......................................................... 14
STEP 4 Cable Installation .................................................................... 18
STEP 5 Leg Cushion Pivot Assembly Installation ................................ 24
STEP 6 Seat Back and Seat Bottom Installation .................................. 26
STEP 7 Apply the Weight Stack Sticker ................................................ 27
STEP 8 Front Cover and Rear Cover Installation ................................. 28
STEP 9 Top Covers Installation ............................................................ 29
STEP 10 Storage Tray Installation ........................................................ 30
STEP 11 Cable Adjustment ..................................................................
STEP 12 Stack Fork Inspections .......................................................... 32
5. OPERATION INSTRUCTION ............................................................ 33
6. MAINTENANCE ................................................................................ 34
MAINTENANCE Schedule .................................................................... 35
MAINTENANCE Task List .................................................................... 36
MAINTENANCE One-Year Maintenance Log ....................................... 37
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 38
3
4
9
9
31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P751 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SportsArt Fitness P751

Summary of Contents for SportsArt Fitness P751

  • Page 1: Table Of Contents

    P751/P752 OWNER’S MANUAL CONTENTS 1. INTRODUCTION ................2 2. SAFETY PRECAUTIONS ..............3. LIST OF PARTS ................. 4. ASSEMBLE THE PRODUCT ............. STEP 1 Cover Support Plate and the Connector Installation ....STEP 2 Handle Installation ..............13 STEP 3 Weight Stack Installation ............14 STEP 4 Cable Installation ..............

  • Page 2: Introduction

    1. INTRODUCTION Congratulations on the purchase of a high quality SportsArt product, the P751/P752 Abduction/Adduction machine. Constructed of high quality materials and designed for years of reliable performance, this product was made for full commercial use. Before this product is assembled or operated, we recommend that you familiarize yourself with this manual.

  • Page 3: Safety Precautions

    2. SAfETy PRECAUTIONS This product was designed and built for optimum safety. However certain precau- tions apply during the use of this product. Please note the following safety precau- tions: • Please read the entire manual before assembly and operation. Make sure the product is installed and operated as instructed in this manual.

  • Page 4: List Of Parts

    3. LIST Of PARTS Box A...
  • Page 5 Box B P752 Box C...
  • Page 6 Box A - Main frame Components No. Name Qty. No. Name Qty. Weight stack top right Cover bracket cover Weight stack top left Cover support plate A cover A3 Main frame Rear cover A4 Cover support plate B-2 Front cover A5 Cover support plate B-1 Bracket A6 Storage tray...
  • Page 7 Components in the Hardware Kit Name Qty. Specification Notes Screw socket SGN-07 Mushroom top inner hex screw M6*P1.0*L12 Mushroom top Phillips screw M5*L15 Mushroom top Phillips screw M5*P0.8*L8 Ronund head Phillips screw M6*P1.0*L12 Round head inner hex screw M6*P1.0*20 Bushing D21.5*10.5 Hex head screw M10*P1.5*L130...
  • Page 8 Components on the Product Name Specification Notes Upper stack carriage set Hex head screw M8*P1.25*L65 Flat washer D17*d8.3*t2 PU tube D12*d8*L51 Nylon hex lock nut Guide rod Round head inner hex screw M8*P1.25*L18 Spring washer M8*t2.0 Flat washer D17*d8*t1.5 Mushroom top inner hex screw M6*P1.0*L12 Flat washer D13*d6*t1.0...

  • Page 9: Assemble The Product

    4. ASSEMBLE THE PRODUCT Follow instructions below to assemble this product. Note that in this manual the words “left” and “right” are used to refer to the product and its parts. As such, these designations correspond to the “left” and “right” sides of a person in position to exercise on this product.
  • Page 10 (a). Insert the screw sockets (10) into place in the main frame (A3) as shown, and then use the screws (11) (12) to secure the brackets (A16) (A17) in place. (Note: The bracket (A16) must be secured to the top of maim frame as shown.)
  • Page 11 (b). Use the screws (13) to secure the cover support plates (A10) to the straight frame of the main frame (A3) and then secure the cover support plates (A4) (A5) to the both side of the curved frame as shown. (Note: The cover support plates must be secured outside of the bracket (A16) (A17).)
  • Page 12 (c). Use the screws (17) to secure the connecting board A (A26) to the connector B (A24) and the main frame (A3). (d). Use the screws (17) to secure the connecting board (A26) to the connector B (A24) and the seat frame (A22). (e).

  • Page 13: Step 2 Handle Installation

    STEP 2 Handle Installation (a). Remove the pin set (46) from the seat frame (A22). (b). Set the handle in place of the seat frame (A22) as shown and then install the pin set (46) back into place.

  • Page 14: Step 3 Weight Stack Installation

    STEP 3 Weight Stack Installation...
  • Page 15 (a). Hold the upper stack carriage set (33), and then cut the zip tie. Gently lower the upper stack carriage set (33) into place as shown. (b). Remove the screws (34). Set the guide rod (35) downward into place as shown.
  • Page 16 (d). Loosen and remove the screws (36) from the stack fork (A7) and insert the weight stack rod (A8) into the central mounting position of the upper stack carriage set (33). Use the screws (36) to secure the stack fork (A7) into place of the upper stack carriage set (33) as shown.
  • Page 17 (f). Tilt the guide rods (35) back into place and then lift them up to their mounting position, and then secure the assembly with the screws (34).

  • Page 18: Step 4 Cable Installation

    STEP 4 Cable Installation P752...
  • Page 19 (a). Insert the cable nut as indicated by the arrows onto the weight stack rod (A8) at least 15-20mm deep as shown. (b). Loosen and remove the screws (37) and the cable route cover from the seat frame (A22) as shown.
  • Page 20 (c). Loosen and remove the screws (30) from the pulley in area A, the screws (31) from the pulley in area B and the screws (32) or bushing (47) from the pulley in area C as shown. P752...
  • Page 21 (30) and then thread the cable through the top of the pulley in area B and secure the screws (31). Finally, secure the cable with the screws (32) or bushing (47) in area C as shown. P751...
  • Page 22 P752...
  • Page 23 (e). Secure the cable route cover of the seat frame (A22) back into place with the screws (37) as shown.

  • Page 24: Step 5 Leg Cushion Pivot Assembly Installation

    STEP 6 Leg Cushion Pivot Assemblies Installation P751 (a). Loosen and remove the screws (38) from the leg cushion pivot assemblies (A23) and the screws (39) from the seat frame (A22) as shown. (b). Secure the leg cushion pivot assemblies plate to the seat frame (A22) with the screws (39) as shown.
  • Page 25 P752 (a). Loosen and remove the screws (38) (44) from the leg cushion pivot assemblies (A23) and the screws (39) from the seat frame (A22) as shown. (b). Secure the leg cushion pivot assemblies plate to the seat frame (A22) with the screws (39) as shown.

  • Page 26: Step 6 Seat Back And Seat Bottom Installation

    STEP 6 Seat Back and Seat Bottom Installation (a). Loosen and remove the screws (42) (43) from the seat bottom (A21) and the seat frame (A22) as shown. (b). Use the screws (42) to secure the seat bottom (A21) to the seat frame (A22) as shown and then usse the screws (42) (43) to secure the seat back (A20) to the seat frame (A22) as shown.

  • Page 27: Step 7 Apply The Weight Stack Sticker

    STEP 7 Apply the Weight Stack Sticker Note: Before applying weight plate stickers, please wipe the area clean, and clean your hands before proceeding to the next step. (a). Align and tape the cardboard to the upper left corner of the weight plate (A30).

  • Page 28: Step 8 Front Cover And Rear Cover Installation

    STEP 8 front Cover and Rear Cover Installation (a). Use the screws (11) to secure the cover bracket (A9) in place on the main frame (A3) as shown. (b). Slide the rear cover (A14) and the front cover (A15) from the top down into the cover support plates’...

  • Page 29: Step 9 Top Covers Installation

    STEP 9 Top Covers Installation *Secure the weight stack top right covers (A1) and the top left cover (A2) with the screws (14). (Note: During assembling, place the bracket of the top covers inside of the cover support plates (A4) (A5) as shown.)

  • Page 30: Step 10 Storage Tray Installation

    STEP 10 Storage Tray Installation (a). Loosen and remove the screws (40) (41) from the storage tray (A6) and the main frame. (b). Hold the storage tray (A6) in place and secure it with the bracket and the screws (40) (41) as shown.

  • Page 31: Step 11 Cable Adjustment

    STEP 11 Cable Adjustment * Insert the stack fork into the gap under the lowest weight plate, and then adjust the large nut at area C. Adjust until the upper stack carriage set moves slightly. To adjust the cable, first insert the (Z) rod and loosen the (Y) nut, and then adjust the (X) nut.

  • Page 32: Step 12 Stack Fork Inspections

    STEP 12 Stack fork Inspections * Please follow operating instructions on the product sticker to test operation and confirm that the equipment is working properly. * Insert the stack fork to make sure that every weight plate can be engaged easily.

  • Page 33: Operation Instruction

    5. OPERATION INSTRUCTION * Pull handle and rotate the machine to select an appropriate position. P751 P752...

  • Page 34: Maintenance

    6. MAINTENANCE This section covers maintenance topics and includes a maintenance schedule, task list, and log. Maintenance Machine Maintenance 1. Apply lubricant to the guide rods every week. Procedure: (a). Put some lubricant on a clean, lint-free cloth. Rub the lubricated cloth on the guide rods.

  • Page 35: Maintenance Schedule

    Maintenance Schedule (P751/P752) Maintenance Schedule Area Day Week Month Quarter Year Notes 1 Exterior Clean. Inspect for looseness and 2 Screws secure if necessary. Check for proper equipment 3 Test operation. Seat bottom/ Use damped cloth to clean. Seat back Check for damage or wear.

  • Page 36: Maintenance Task List

    Maintenance Task List Like cars, fitness products require maintenance. Regular maintenance ex- tends product life, and failure to maintain products can void the manufac- turer’s warranty. Copy the maintenance log sheet, and record maintenance work for each fitness product. Daily tasks 1.

  • Page 37: Maintenance One-Year Maintenance Log

    Maintenance One-year Maintenance Log Facility:_______________________ Supervisor:____________________ Product model number:__________ Serial number:_________________ Start date: ____________________ End date:_____________________ Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28 Completed Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52 Completed Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28...

  • Page 38: Consignes De Sécurité Importantes

    7. CONSIGNES DE SÉCURITÉ IMPORTANTES Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale. Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit. • Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi noter les consignes de sécurité...

This manual is also suitable for:

P752

Table of Contents