A. SAFETY INSTRUCTIONS Read all cautions/warnings and obtain proper instruction on use of the machines prior to using. Use appropriate positioning and controlled movements. Assemble and operate the strength on a solid, level surface. Do not use outdoors or near water. Never allow children on or near the strength.
Page 3
B. Introduction Rear top cover Front top cover Pivot Rear cover Front cover (A) Usage sticker Front cover (B) Handlebar Side frame Selection pin (3.5 Lbs / 1.5 kgs) Selection pin (6.5 Lbs / 3 kgs) Cord Arm support pad Stack fork Connection host Back cushion...
C. List of Parts 1. One side frame 2. One main frame 3. Four hexagon head bolts, M10 x P1.5 x L30, for the main frame 4. Four spring washers, M10, for the main frame 5. Four hexagon nylon nuts for the main frame 6.
Page 5
D. STEP BY STEP INSTRUCTION: 1. Hold the side frame during assembly, then connect the linkage tube to the side frame. Secure screws tightly as shown in Fig. 1. Fig.1 2. Secure the arm support frame onto the main frame as shown in Fig. 2. Fig.2...
E. BELT ADJUSTMENT: 1. If the belt is too tight or too loose, first loosen nut A as shown then adjust nut B. If the belt length is too long, adjust downward; if the belt length is too short, adjust upward.
Page 7
HOW TO USE THE MINOR WEIGHT STACK 1. To adjust the minor weight stack, insert the upper pin to add 3.5Lbs/1.5kgs or the lower pin to add 6.5Lbs/3kgs. 2. Pull the pin to release the weight. (See Fig. 4) 3.5Lbs/1.5kgs 6.5Lbs/3kgs Fig.4...
Need help?
Do you have a question about the A925 and is the answer not in the manual?
Questions and answers