Specification - Axminster AP50E Manual

Be aware that in dry air periods or areas, the movement of the
air through the machine can generate static electric fields.
These are not normally a problem as the machine is bonded
together via its construction and the whole is earthed back
through the electrical supply; problems can occur with isolated
items, such as stands or hosing that are insulated from the
ground (standing on rubber feet, suspended in the air etc).
If possible, try to connect everything together electrically, to
eliminate static shocks.
ONLY USE DUST EXTRACTION BAGS
WITH THIS MACHINE NOT DOMESTIC
WASTE BAGES!
Code
Model
Rating
Power
Air Flow
Noise Level
Particle Size
Hose Diameter
Bag Capacity
Overall L x W x H
Weight
Please read through the section entitled Parts Identification and Description, this will enable you to more readily identify those
parts of the cyclone extractor.
Please note: some of this assembly procedure is best accomplished by two persons. Although the tasks are not
impossible, some of the items are heavy and awkward, and a mishandling error could cause injury. Please think
about what you are doing, your capabilities and your personal safety. We have added the 'two person symbol' to
any operation that we recommend should be a two person task.
Unpack all the boxes and check all the components listed in the "What's Included" section. If any parts or components are missing,
please contact our Customer Services Department using the procedures and telephone numbers listed in our catalogue.
Please note: on occasions the packing list is not strictly adhered to. Please check all the boxes, packets etc. to make sure that all the
parts have been accounted for.
PLEASE RECYCLE ANY UNWANTED PACKAGING RESPONSIBLY!
SPECIFIC SAFETY FOR DUST EXTRACTORS
Use the integral metal coil in flexible plastic hosing to connect
units together
Try to route the power cable and the hosing away from busy
walkways.
allow the inlet to become 'dead ended' , or block or
DO NOT
restrict the outlet, this puts undue strain on the motor and can
lead to overheating.
DO NOT PLACE DUST EXTRACTION
BAGES OVER THE FILTER ASSEMBLY!
5
.

SPECIFICATION

750W 230V 1ph
920m³/hr @100 mm
558 x 495 x 1169 mm
ASSEMBLY
Continues Over....
107631
AP50E
Professional
75 dbA
1 micron
100 mm x 1
50L
25 kg