Yamaha CZD300J Owner's Manual page 96

Periodic maintenance and adjustment
1. Signaling system fuse
2. ABS control unit fuse
3. Main fuse 2
4. Radiator fan motor fuse
5. Backup fuse
6. Spare fuse
7. ABS motor fuse
8. ABS solenoid fuse
9. Turn signal light and hazard fuse
10.Terminal fuse 1
11.Answer back fuse
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
8
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
1
2
3
4
6
5
7
8
6
9
10
11
[EWA15132]
Specified fuses:
Main fuse:
30.0 A
Main fuse 2:
7.5 A
Terminal fuse 1:
2.0 A
Signaling system fuse:
10.0 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
15.0 A
Turn signal light and hazard fuse:
7.5 A
ABS control unit fuse:
7.5 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
15.0 A
Answer back fuse:
2.0 A
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
8-31