Yamaha CZD300J Owner's Manual page 52

Instrument and control functions
1
1. Bolt
Tightening torque:
Windshield bolt:
8 N·m (0.8 kgf·m, 5.9 lb·ft)
5. Place the bolt access covers, and
5
then install the quick fasteners.
1. Bolt access cover
To change the windshield height to
the low position
1. Remove the bolt access covers by
removing the quick fasteners.
2. Remove the windshield by remov-
ing the bolts.
3. Remove the bolts, and then install
the bolts in the desired position.
1
1
1. Bolt
1
1
1. Bolt
4. Install the windshield to the low
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windshield could cause an acci-
dent. Be sure to tighten the
screws to the specified torque.
[EWA15511]
1. Bolt
5-23
1
1
1
1