Table of Contents
Advertisement
Backhaul FM4200 Mobi
Cisco Ultra-Reliable Wireless
Figure 31. Configurator (Advanced Radio Settings menu)
Using the FluidMAX Management Setting
The FluidMAX™ Management controls are used to set the unit's
FluidMAX™ operating mode.
Note that the FluidMAX™ Management controls are only available under
the following conditions:
• If the unit's firmware is equipped with the FluidMAX engine.
• If the unit is currently being operated as part of a point-to-multipoint
network topology.
To use the FluidMAX Management menu, do the following steps:
1.
Click the Radio Mode drop-down menu.
2.
Choose the correct FluidMAX operating mode from the following
list of options:
• AUTO: The FluidMAX engine is enabled, and the unit role
© 2020 Cisco and/or its affiliates. All rights reserved.
is set automatically. Depending on various factors, the unit
will automatically choose whether to transmit using the
Page 92 of 177
Advertisement
Table of Contents
