Table of Contents
Advertisement
Cisco Ultra-Reliable Wireless
Backhaul FM4200 Mobi
• For mobile radio transceivers, the same information sidebar will be
shown on the right side of the view. An information widget will also
be shown on the lower left part of the view.
• For wireless links, only the information widget will be shown. A
typical information widget is shown below:
When an information widget is shown for a mobile radio or a wireless link,
the widget shows the following information:
• The widget header shows the aggregate throughput, operating
frequency, and channel-access mode of the link between the mobile
transceiver and the stationary transceiver to which it is connected.
• The two radios connected by the wireless link are shown as name
labels with IP addresses, connected by a double-pointed line.
• The main body of the widget contains live readings on uplink and
downlink throughput, LER, PER, RSSI, MCS, and modulation rates.
© 2020 Cisco and/or its affiliates. All rights reserved.
NOTE
Only one radio information sidebar can be shown at any
time.
NOTE
A maximum of two radio information widgets can be
shown at any time.
Page 81 of 177
Advertisement
Table of Contents
