Table of Contents
Advertisement
Backhaul FM4200 Mobi
Cisco Ultra-Reliable Wireless
The window shows a list of wireless links to other Fluidmesh units that
have been detected by the local unit, and the relative strength of each
wireless link in decibel-milliwatts (dBm).
To do an accurate alignment of a local antenna for a specific wireless link,
do the following steps:
1.
Click the -antenna alignment and stats link under GENERAL
SETTINGS in the left-hand settings menu.
• The ANTENNA ALIGNMENT AND STATS window will be
Figure 24. Configurator GUI (Antenna alignment and
stats dialog)
2.
More than one two-way wireless link may be shown in the
Detected Links table. Find the two-way link for which the local
antenna must be adjusted.
3.
Click the Align button.
• The ANTENNA ALIGNMENT AND STATS tool will be
© 2020 Cisco and/or its affiliates. All rights reserved.
shown
(Figure 24 (page
shown
(Figure 25 (page
IMPORTANT
The Fluidmesh Transmission Power Control
(TPC) algorithm will be disabled during the
antenna alignment process. This eliminates
the possibility of false radio-transmission
power readings.
69)).
70)).
Page 69 of 177
Advertisement
Table of Contents
