Table of Contents
Advertisement
Backhaul FM4200 Mobi
Cisco Ultra-Reliable Wireless
2.
Enter a defined network passphrase in the Shared Passphrase
field.
3.
Specify the country in which the unit is installed by selecting the
correct option from the Country drop-down menu.
4.
Specify the unit's operating frequency by clicking the correct
option in the Frequency (MHz) drop-down.
• You can change the frequency of each radio link in order to
© 2020 Cisco and/or its affiliates. All rights reserved.
Figure 23. Configurator GUI (Wireless Radio dialog)
IMPORTANT
If a shared passphrase is defined, the same
passphrase must be used for all Fluidmesh units in
the same network.
The shared passphrase can be composed of any
ASCII characters except the following: '`"\$=
CAUTION
Different countries frequently have differing
telecommunications regulations. If the Country listing
is not set correctly, the unit may violate national
telecommunications legislation.
CAUTION
Make sure that the chosen country listing matches
the country in which the unit is installed before
changing the Frequency (MHz) value.
minimize interference with other wireless networks
Page 64 of 177
Advertisement
Table of Contents
