Maintenance; Fault Conditions - OM POWER OM2002+ User Manual

6.

Maintenance

6.1.

Fault conditions

If a fault condition appears during the operation of the amplifier, the safety circuits of OM2002+ will react, the
FAULT LED lights. There are several fault or warning messages possible to appear on the display (under the fault
LED) in abbreviated form, when some of the protection will be activated. To view fault history with full text of
the faults, touch FAULT from Setup Menu. The OM2002+ power amplifier will respond to these conditions:
1. High Output Power
2. High Reflected Power
3. High Input Power
4. Different Current Error
5. Low Supply Voltage
6. PA too Hot
7. High Supply Current
8. Overdrive Error
9. SWR too High
10. Power coupler fault
- FWD
- Refl
- Pin
- Diff.
- Voltage
- Temp
- Current
- Overd.
- SWR
- Coupler
35