Table of Contents
Advertisement
To deactivate EBS you have to set Bias switch to OFF. I such a case bias value immediately after pressing the PTT
will be high.
5.3.5.
Preamplifier delay
You can control switching of an external (remote) RX preamplifier from the PA using PREAMP ON/OFF touch
button. For reliable working condition and safety of preamplifier there is important to set some delay of its
switching according to the PTT. Possible range is from 0 to 200ms. Default value is 20 ms.
Touch BIAS from the Setup screen. Use ON/OFF to set bias working
condition. Then touch BACK. Screen will go automatically back to the
Setup Menu.
29
Advertisement
Table of Contents
Need help?
Do you have a question about the OM2002+ and is the answer not in the manual?